Stainless Steel Sinks

There are varieties of sinks which are made up of stainless steel. One should clean the sinks as soon as the work is over. One should wash the stainless steel sinks with a solution of water and liquid detergent or a solution of water and baking soda. After cleaning them, one should rinsed them properly and make them dry with a soft cloth or paper towel.

Sinks should not be cleaned with the steel wool or scouring powders as they can make scratches on the stainless steel. If any person wants to make the sink bright, then one should dip the cloth in ammonia or vinegar or sprinkle a little baking soda on the sponge and gently rub the stainless steel sink with it and then make it dry with a soft towel.

Different Types of Stainless Steel Sinks

There are large varieties of stainless steel sinks and they are:-

Lancelot Stainless Steel Undermount Sinks

Features Involves mounting bracket Three and a half inch diameter buried drain opening. 18 gauge and type 301 nickel bearing stainless steel. The uncovered shells are well polished. Available in single or double bowl

• Soundshield undercoating restrains condensation and increases sound deadening.
• Includes cut-out outline

Camelot Stainless Steel Sinks

Features Contains all necessary mounting hardware 20 gauge and type 301 nickel bearing stainless steel. Available in single, double or triple bowl Available with or without tap holes The exposed plain of the sinks are polished. Sound protection undercoating increases sound sedating and reduces compression.

20-Gauge Stainless Steel Sinks

Features An exclusive double bowl sink made up of stainless steel which is designed by Revere and enables inspiration. It is fixed at an angle on the U-shaped or L-shaped countertop which saves expensive counter gap. It can be strained from high quality 300 series stainless steel up to a depth of 7 inches.

• It obtains a diamond-glo and high shine machine polish attached with the soft satin top floor finishing.

Underbar Stainless Steel Sinks

Features 18 inch front to back depth Half inch corner sink drains One 12 inch drain board on right or left Two sink bowls of dimension 10 inch * 14 inch * 10 inch It is NSF approved Drains and Faucets with an overflow are included

Advance Tabco Space Saver Stainless Steel Sink

Features Stainless hand sink wall mount model One and a half inch flat top strainer 9 inches wide * 9 inches front to back * 5 inches deep 20 gauge stainless steel construction with wet increased tap.